Jandy Pool Equipment: Pumps, Heaters & AquaLink
Compare Jandy variable-speed pumps, gas heating and AquaLink controls by the job they perform. Choose the right equipment family, then check exact model and installation compatibility before buying.
Shop Jandy Pool PumpsHow to ChooseShop Jandy Equipment by Project
Replacing a pump, adding pool heating or upgrading automation? Start with the equipment type that solves your problem; these categories are not interchangeable.
SHOP BY NEED
Choose the Jandy Product That Fits Your Project
Five targeted shopping paths cover distinct Jandy purchase decisions. Verify your installer can source and support the selected model; some Jandy equipment is distributed through authorized trade channels.
VS FloPro 1.65 HP pump
The 1.65 HP dual-voltage VS FloPro is designed for replacement applications and is offered with an optional SpeedSet controller.
Check exact SKU, 115/230 V electrical setup, pump sizing, plumbing alignment and whether the controller is included.
VS FloPro 2.7 HP pump
Consider this larger variable-speed FloPro option when the system needs more flow for features or equipment. More horsepower is not automatically better.
Have a professional check the system curve, filter limits, piping, voltage, controller option and required flow.
JXi pool and spa heater
The JXi family includes gas heater configurations and supports integration with Jandy AquaLink controls.
Confirm fuel type, required heating capacity, venting, gas supply, clearances and professional installation.
Replacing or servicing an existing system?
Shop the exact compatible component, not a look-alike.
VersaTemp heat/chill pump
VersaTemp is a heat-pump product family for owners who want to compare heating and chilling rather than gas heat alone.
Verify the exact unit model, electrical service, climate performance, heating capacity and installation requirements.
AquaLink RS / iAquaLink controls
AquaLink RS manages compatible pool equipment; iAquaLink 3.0 adds app-based remote control when paired with supported hardware.
Confirm the existing control panel, power center, revision, kit contents and compatibility before buying an upgrade.
BUYER'S DECISION GUIDE
How to Choose Jandy Equipment for Your Pool
Start with the job you need to complete, then confirm the technical details. These four decisions prevent the most common expensive ordering mistakes.
Choose the equipment job first
A filtration pump moves water, a heater changes water temperature and AquaLink automates supported equipment. Do not compare them as substitute products.
Size pumps using hydraulics
For a VS FloPro replacement, confirm required flow, total dynamic head, plumbing, filter rating and electrical service. Oversizing can add expense without improving performance.
Match heating to your climate
JXi gas heating and VersaTemp heat-pump heating have different installation, operating and climate considerations. Compare the desired temperature rise, usage pattern and fuel or electricity costs.
Audit the automation system
AquaLink RS, iAquaLink interface upgrades and pump controllers are different purchases. Record current board, firmware and equipment models before selecting a kit.
SAVE BEFORE YOU SHOP
Jandy Pre-Purchase Compatibility Checklist
Gather these details before comparing listings or asking an installer to quote a system.
- Record the exact existing Jandy model number and any controller revision.
- For pumps, check required flow, voltage, pipe connections and equipment-pad clearance.
- For JXi heaters, confirm gas type, venting, gas line and heating capacity.
- For VersaTemp, check electrical requirements, climate suitability and clearance.
- For AquaLink upgrades, identify power-center hardware and supported equipment.
- Confirm whether the listing includes required controllers, sensors, unions or interface kits.
For electrical and plumbing installation, follow manufacturer instructions and local codes.
BUYER QUESTIONS
Jandy Pool Equipment FAQs
Answers to the compatibility and sizing questions worth resolving before you place an order.
Will a Jandy VS FloPro pump work with my current pool plumbing?
Jandy describes an adjustable base on VS FloPro models intended to ease replacement, but pipe alignment, hydraulic requirements, voltage and available space still need to be checked.
Do I need AquaLink RS to use a Jandy variable-speed pump?
Not necessarily. Some VS FloPro versions support a SpeedSet controller, while compatible AquaLink or iQPUMP controls offer additional options. Check the exact pump SKU and controller combination.
Should I choose a JXi gas heater or a VersaTemp heat pump?
JXi is a gas-heater family; VersaTemp is a heat/chill pump family. Compare desired heating speed, local climate, fuel availability, electrical capacity and installation costs.
Can I add iAquaLink to an older AquaLink installation?
Upgrade and conversion kits exist, but compatibility depends on the existing power center, board and system generation. Verify the required kit with Jandy documentation or a qualified installer.
Are all Jandy equipment listings ready for DIY installation?
No. Pumps, heaters and automation can require electrical, gas, plumbing or controls expertise. Some Jandy products are trade-distributed; check warranty and installation requirements before purchasing.
KEEP COMPARING
Related Pool Equipment Resources
Use these guides to verify sizing, circulation and alternatives before making a final purchase.
THE BOTTOM LINE
Ready to Compare Jandy Equipment?
Start with your project: a properly sized variable-speed pump, a compatible heating system or an AquaLink upgrade. Confirm exact model numbers, installation requirements and seller terms before ordering.
Shop Jandy Pool AutomationShop Jandy Pool Pumps