AutoPilot Salt Chlorine Generators: Systems, Cells & Compatibility
Compare AutoPilot Pool Pilot generators, replacement salt cells and manifolds. Identify the exact controller and cell family before buying.
Compare AutoPilot OptionsCheck CompatibilityStart With Your AutoPilot System Type
Choose a complete system for a new installation, a verified compatible cell for replacement, or an exact part for a diagnosed repair.
SHOP BY NEED
Shop AutoPilot Equipment by Need
These options solve different problems. Compare the two complete systems if you are installing new equipment; shop replacement components only after confirming compatibility.
Pool Pilot Evolve with PPM1 manifold
For a complete newer-system purchase
Compare this Pool Pilot Evolve configuration when replacing a complete chlorination setup, not merely a worn cell.
Confirm the precise Evolve controller package, PPM1 manifold, cell type, pool-size rating and voltage in the seller listing.
Pool Pilot Digital Nano (75041A)
For owners matching the Digital Nano platform
The manufacturer manual identifies 75041A-series Digital Nano units with a PPM1/PPM1M manifold and PPC1 cell.
Do not substitute a Nano+ manifold or PPC2 cell into a Digital Nano. Verify whether the listing is complete, used or replacement-only.
Pool Pilot Digital Nano+ (75043A)
For the Nano+ controller family
The manufacturer manual identifies 75043A-series Nano+ units with PPM2/PPM2M manifolds and PPC1 or PPC2 cell options.
A PPC1 cell may provide lower output than PPC2 on Nano+. Confirm controller generation and manifold before purchasing.
Replacing or servicing an existing system?
Shop the exact compatible component, not a look-alike.
AutoPilot PPC1 replacement cell
For compatible Digital Nano and selected other systems
PPC1 is the specified cell for Digital Nano and an allowed option for Nano+. Some older systems used different cell naming.
Cross-check the exact controller, cell label and current manufacturer compatibility chart. Do not purchase on appearance alone.
AutoPilot PPC2 replacement cell
For compatible Digital Nano+ systems
PPC2 is the standard cell identified for the Digital Nano+ PPM2 manifold in the manufacturer manual.
PPC2 is not a direct substitute for the standard Digital Nano PPC1 configuration. Verify manifold and controller first.
BUYER'S DECISION GUIDE
How to Choose an AutoPilot Salt System
Start with the job you need to complete, then confirm the technical details. These four decisions prevent the most common expensive ordering mistakes.
Complete system or replacement cell?
For a new installation, check the full kit contents. If your controller still works, compare compatible replacement cells first; a cell alone cannot replace a complete system.
Size for chlorine demand
Pool gallons are only a starting point. Sunlight, temperature, swimmer load and pump runtime all affect output needs. Check the exact model's published chlorine production.
Confirm connections and power
Match controller compatibility, voltage, plumbing unions, flow sensing, cable connector and installation clearance before buying any system or replacement part.
Compare ownership costs
Include installation, replacement-cell pricing, water testing, maintenance and warranty terms. The lowest initial price may not be the lowest long-term cost.
SAVE BEFORE YOU SHOP
AutoPilot Compatibility Checklist
Have these details ready before opening a product listing or contacting a seller.
- Measure your pool volume and note typical pump runtime.
- Record the existing controller and cell part numbers, if applicable.
- Confirm exactly what the advertised kit includes.
- Check voltage, unions, pipe size and cable connectors.
- Review the seller's current warranty and return terms.
- Diagnose a repair fault before ordering a replacement part.
For electrical and plumbing installation, follow manufacturer instructions and local codes.
BUYER QUESTIONS
AutoPilot Salt Chlorinator FAQs
Answers to the compatibility and sizing questions worth resolving before you place an order.
Can I use a PPC2 cell in a Digital Nano?
No. AutoPilot’s Digital Nano/Nano+ manual specifies PPC1 for the Digital Nano; PPC2 is associated with the Nano+ PPM2 manifold. Check the model plate before buying.
What is the difference between Digital Nano and Nano+?
The documented 75041A Digital Nano uses PPM1/PPM1M and PPC1. The 75043A Nano+ uses PPM2/PPM2M and can use PPC1 or PPC2, with different maximum chlorine output.
Should I replace the controller or just the cell?
If diagnostics indicate a worn cell and the controller and manifold are sound, compare the exact compatible replacement cell first. Fault codes alone do not prove the cell is bad.
How do I size an AutoPilot salt generator?
Match the manufacturer’s current rated output to your pool volume, pump runtime, climate and expected chlorine demand. A pool-gallon marketing rating alone is not enough.
Can I substitute a different AutoPilot manifold?
Do not assume manifolds interchange. Check the controller series, required flow, plumbing connections, cell model and installation manual for the exact package.
KEEP COMPARING
Related Pool Equipment Resources
Use these guides to verify sizing, circulation and alternatives before making a final purchase.
THE BOTTOM LINE
Ready to Compare AutoPilot Equipment?
Start with your exact AutoPilot controller model. Compare complete Evolve systems for a new installation, or PPC1/PPC2 cells only after checking controller and manifold compatibility. Always verify the current listing and manufacturer manual before ordering.
Shop AutoPilot Salt SystemsShop AutoPilot Replacement Cells