Pool Equipment Brands: Pumps, Filters, Heaters & Cleaners
Compare pool equipment by the job it needs to do, then explore manufacturer-specific options for pumps, filtration, heating, cleaning, controls and replacement parts.
Explore Buying OptionsHow to ChooseStart With the Equipment Category You Need
A replacement pump, a new filter, a heater and a cleaner solve different problems. Pick the equipment category first, then compare verified brand models and installation requirements.
SHOP BY NEED
Shop by Need: Match the Brand to the Equipment
These are distinct buying paths, not interchangeable products. Each option identifies a useful manufacturer family and the checks that matter before ordering.
Pentair IntelliFlo3 variable-speed pump
For owners replacing or upgrading their circulation pump
Pentair identifies IntelliFlo3 as a variable-speed and flow pump; select it when adjustable circulation is the primary need.
Confirm hydraulic sizing, supply voltage, plumbing connections, automation integration and installation requirements.
Jandy VS FloPro variable-speed pump
For variable-speed circulation and Jandy control integration
Jandy lists VS FloPro pumps in its residential pump lineup. Compare control options against the existing equipment pad.
Check the exact pump model, electrical requirements, controller compatibility and pipe alignment.
Pentair Clean & Clear cartridge filters
For cartridge filtration without backwashing
Pentair offers cartridge filtration systems; choose the filter family only after calculating required flow and available service space.
Match filtration area, maximum flow, plumbing, clearance and the correct replacement cartridge part numbers.
Jandy CV cartridge filters
For a Jandy cartridge-filter installation
Jandy lists CV cartridge filters in its residential equipment lineup. Compare the vessel and cartridge configuration with your maintenance preferences.
Verify the exact CV model, plumbing port sizes, filter area and cartridge replacement availability.
Pentair ETi 400 gas heater
For owners prioritizing gas heating
Pentair identifies the ETi 400 in its heating range. A gas heater is a different purchase from an electric heat pump.
Confirm fuel type, gas supply, venting, required clearances, heater sizing and professional installation.
Jandy JXi gas pool heater
For gas-heated pools or spas
Jandy lists the JXi heater family among its residential heating products; compare the installation constraints before choosing capacity.
Check gas type, heater input rating, ventilation, water flow and compatibility with existing controls.
Controls, cleaning and sanitation equipment
Choose these systems for their specific job; confirm integration before ordering.
Pentair IntelliCenter automation
For coordinating multiple pool-pad devices
Pentair lists IntelliCenter as a pool automation control system. It is not a substitute for the pump, heater or sanitizer it controls.
Inventory controlled circuits, existing equipment brands, relays, communication interfaces and required expansion modules.
Jandy AquaLink RS automation
For coordinated pool and spa controls
Jandy documents AquaLink RS within its automation lineup. Choose by the equipment and features the control panel must support.
Check exact controller generation, expansion capacity, wiring, compatibility and professional setup requirements.
Pentair robotic pool cleaners
For automated debris pickup rather than circulation
Pentair maintains a pool-cleaner product category. Select a specific cleaner by pool surface, cleaning coverage and cable or battery preference.
Verify pool dimensions, wall and waterline coverage, filter basket type, cable length and power requirements.
Pentair IntelliChlor salt generators
For chlorine generation from a compatible salt system
Pentair lists IntelliChlor Plus and LT salt chlorine generators. A cell-only replacement is not equivalent to a full system.
Match pool volume, output rating, power center/controller, cell connections and plumbing.
BUYER'S DECISION GUIDE
How to Choose Across Pool Equipment Brands
Brand is only one part of the decision. Start with the job, then compare system fit, installation and serviceability.
Define the equipment job
Pumps move water, filters remove suspended debris, heaters raise temperature, cleaners collect debris, and automation coordinates devices. Do not compare them as substitutes.
Size for the actual pool
Record pool volume, target flow, equipment pressure loss and desired heating conditions. Use manufacturer sizing guidance rather than horsepower or BTU labels alone.
Check ecosystem compatibility
Verify voltage, plumbing, communication protocols, control interfaces, installation clearances and exact replacement-part numbers.
Compare service and ownership
Consider replacement consumables, local service support, energy use, warranty conditions and installation cost alongside the purchase price.
SAVE BEFORE YOU SHOP
Pre-Purchase Equipment Compatibility Checklist
Gather these details before choosing a brand or opening a product listing.
- Identify the failed or missing equipment category and the job it must perform.
- Record pool volume, current equipment model numbers and installation photos.
- Check existing pipe size, voltage, breaker capacity and available clearances.
- For pumps and filters, compare system flow and pressure requirements.
- For heaters, verify fuel/electrical supply, local codes and required clearances.
- For automation and salt systems, check controller and component compatibility.
For electrical and plumbing installation, follow manufacturer instructions and local codes.
BUYER QUESTIONS
Pool Equipment Brand FAQs
Answers to common buying decisions when comparing major equipment manufacturers.
Is one pool equipment brand best for every category?
No. Compare the specific pump, filter, heater or cleaner against the installation and service requirements. A brand with suitable controls may not have the right replacement for an existing filter.
Can I mix Pentair and Jandy equipment?
Some equipment can operate in mixed-brand installations, but control features and communication may be limited. Confirm the exact model and controller documentation before purchasing.
Should I replace a complete system or one component?
Diagnose the failed part first. A compatible replacement cartridge or salt cell may be enough, while a new pump or automation controller can require more extensive changes.
What matters most when selecting a pool pump?
Required flow at the actual system head, electrical compatibility, plumbing, speed control, installation and ongoing energy use matter more than a horsepower label alone.
Where should I start when choosing a heater?
First decide gas versus heat pump based on climate and use, then evaluate heating load, utility supply, installation clearances and the manufacturer sizing guidance.
KEEP COMPARING
Related Pool Equipment Resources
Use these category-specific guides for model comparisons and sizing before buying.
THE BOTTOM LINE
Ready to Compare Pool Equipment Options?
Start with the equipment category that solves your problem. Compare the exact manufacturer model and installation requirements, then review current seller listings for included parts and warranty terms.
Shop Pool PumpsShop Pool Filters